Lightweight Aggregate Concrete (LAC)

Chapter 1: Introduction 1.1: Foreword Aggregate and cement concrete drama a critical function in the civil technology where the building of constructions both for domestic and commercial intent is dependent upon the quality and scientific features of the concrete used as argued by Leif Berntsson Satish Chandra ( 2002 ) [ 1 ] . This is apparent from the fact that concrete is used in many applications apart from structural applications including insularity, make fulling etc†¦ In this study a critical analysis on the lightweight sum concrete ( LAC ) is presented to the reader. The research will supply a comprehensive penetration on the scientific facets environing LAC and the demand for utilizing LAC in structural applications. 1.2: Purpose and Aims The purpose of this study is to show a critical analysis on the Lightweight Aggregate Concrete ( LAC ) and research on its structural applications and farther developments. The above purpose is achieved by encompassing the study on the undermentioned aimsTo carry on a comprehensive overview on the Lightweight Aggregate Concrete ( LAC ) by supplying the history, definitions and economic factors environing the applications and usage of LAC in civil constructions.To supply a critical overview on the production of cement and its belongingss in the visible radiation of LAC and its application in civil constructions.To show a scientific analysis on the belongingss of LAC utilizing different composing stuffs including both the mechanical and chemical belongingss.To look into on the ordinances refering to LAC and their effects on a specific composing of LAC in a given geographical part.To look into on the LAC production and usage in Greece.1.3: Research Scope The presence of concrete in civil technology is thorough in nature and therefore the research range is limited to the composing of the LAC and its application in civil construction applications. The cardinal facets of the LAC and its industry in Greece is besides included in the range of the research although a planetary research on the LAC industry and ordinances refering to LAC is out of range of this undertaking. The research range besides includes the probe of the general ordinances adhered in the Europe including the ACI-318 and design considerations in the visible radiation of Seismic Design. 1.4: Research methodological analysis The nature of the research is dependent on the analysis and findings environing the LAC which is used in civil constructions. Since constructing a civil construction is non portion of the undertaking due to be and resource restraints, the research methodological analysis is strictly dependent on qualitative analysis utilizing secondary research informations. The qualitative attack to research in instances of the technology analysis is advised as a dependable attack as the findings from the research on the secondary resources are already published therefore supplying a validated beginning of information for analysis. This is farther justified by John W. Creswell ( 2002 ) [ 2 ] . Hence the research methodological analysis in this study is qualitative research utilizing published resources including diaries, text books and scientific documents. The Internet is used as the chief hunt infinite for roll uping information to execute the qualitative analysis. 1.5: Chapter Overview Chapter 1: Introduction This is the current chapter where the reader is provided with a brief debut on the subject, research purpose and aims, range and methodological analysis. The chapter sets the phase for the overall research presented in the study. Chapter 2: Literature Reappraisal In this chapter a historic overview on the concrete and the usage of Lightweight Aggregate Concrete ( LAC ) is presented to the reader. This is so followed by the definition of the LAC and its application in the civil structural applications from a historic position. The chapter is concluded with an overview on the economic factors and benefits realised through the usage of the LAC in the civil construction applications with illustrations. The economic overview besides throws visible radiation on the cardinal facets of LAC that benefit the overall concrete composing in structural applications every bit good as supply a elaborate reappraisal of the assorted LAC composings used in the yesteryear during the initial phases of LAC’s usage in the building industry. Chapter 3: Concrete Production This chapter presents a elaborate overview on the modern concrete production techniques and the development of the production techniques over the old ages. The two popular techniques used in the production viz. the rotary kiln and the sintering procedure with penetration on the fluctuations is presented to the reader in this chapter. Furthermore, the lightweight sum production and the cardinal production methods used in the commercial applications including the advantages associated are presented to the reader. Chapter 4: LAC – Properties, Regulations and composing analysis based on geographics. This chapter presents a critical analysis on the belongingss of LAC and the assorted combination of lightweight sum that is used in different classs of the building. The research throws visible radiation on the assorted composings of lightweight sum and their distinguishable characteristics that help accomplish the coveted benefits in a structural application. The chapter so presents a critical overview on the ordinances refering to the LAC followed by the composing analysis based on the stuffs that are available locally to a given geographical location. The chosen geographics for this research is Greece. Chapter 5: Decision This chapter reviews the aims of the research followed by supplying the decision to the study. Chapter 2: Literature Reappraisal 2.1: Historical overview Concrete, typically a mixture of sand, crushed rock and cement day of the months back to ancient history when ruddy calcium hydroxide was used as a cementing constituent in doing concrete ( Leif Berntsson Satish Chandra, 2002 ) . This makes it clear that the current mixtures of concrete have evolved over the historic periods to provide assorted technology demands with the developments in scientific discipline and the inventions in technology as argued by Leif Berntsson Satish Chandra ( 2002 ) . A classical illustration for the development of concrete since the ancient history is the usage of concrete by Romans in 300 BC when they found that blending a pink sand-like stuff which was volcanic ash they obtained from Pozzuoli with their normal lime-based concretes resulted in a far stronger stuff. The history behind the usage of sum to do concrete mix day of the months back to every bit early as the early the Roman period when the Romans used advanced methods in fixing concrete mixes with different sum stuffs to accommodate the structural demands and strength. The classical illustrations for the above statement include the usage of lightweight sums as in the roof of the Pantheon, and embedded support in the signifier of bronze bars as argued by Leif Berntsson Satish Chandra ( 2002 ) . The engineering in concrete utilizing different sums every bit good as accounting for thermic and other physical qualities of re-enforcing stuffs to do concrete mixes that provide the coveted strength is apparent throughout history although the industrial revolution and the addition in the technology and the function of steel in the 20Thursdaycentury have increased the invention every bit good as developments around the engineering of doing the right concrete mix. Concrete is non merely a critical component in the civil structural applications but besides a cardinal component in many other applications environing the building concern doing it one of the of import and most sought after merchandise in the technology concern itself as argued by Fu-Tung Cheng and Eric Olsen ( 2002 ) [ 3 ] . This is of course because of the fact that concrete is non merely a constituent in the building of civil constructions but besides a design ingredient in make up one's minding upon the strength, truss and other physical elements that govern the stableness of a given edifice. This is besides justified in the statements of Leif Berntsson Satish Chandra ( 2002 ) . The definition of cement in technology footings refers to pulverize stuffs which develop strong adhesive qualities when combined with H2O. This makes it clear that the cementing action of volcanic ash that was used to do concrete by the Romans autumn under the cement. It is farther apparent that concrete is referred to as a composite edifice stuff made from the combination of sum and cement binder. From the above it is clear that the developments in the quality of cement and the innovation of Portland cement, gypsum plaster, etc†¦ have a direct influence on the development of the concrete engineering although the aggregative constituent of the concrete composing plays an every bit of import function in assorted mixes of concrete that serve a coveted intent as argued by Leif Berntsson Satish Chandra ( 2002 ) . Another component of greater significance to the development of concrete engineering in the recent old ages every bit early as the 1900s is the development of concrete boats during the 2nd universe war where the lightweight sum concrete played a critical function in the design and building of the ships itself as argued by Glenn A. Black ( 2004 ) [ 4 ] . It is besides interesting to observe that the importance of concrete has increased with the demand for refined and purpose specific concrete mixes where the function of concrete has been non merely to supply the structural support but besides the coveted strength at the needed physical conditions that is set in the given geographical location as argued by Glenn A. Black ( 2002 ) . The growing of the expanded clay and shale industry since the morning of the 20Thursdaycentury and the developments during the Second World War when the lightweight sum concrete utilizing clay and shale was used to build the war ships marked the accelerated growing of the usage of lightweight aggregative concrete as argued by Glenn A. Black ( 2004 ) . 2.2: Definition of lightweight sum In order to specify the lightweight sum – the subject under research in this thesis, it is indispensable to show the basicss environing the lightweight sum. Hence this subdivision foremost presents a brief research on sum, its function in building as portion of the concrete mix and so travel towards the nucleus subject ( i.e. ) the definition of lightweight sum. Aggregate is the footings used to jointly mention to the ingredients in doing a concrete mix that gives strength and texture to the overall concrete composing made of sand, cement and sum as argued by Glenn A. Black ( 2004 ) . Aggregate is the composite stuff of the concrete that is aimed to defy compressive emphasis doing it clear that the size, strength and weight of the aggregative stuffs are critical constituents for the overall efficiency of the concrete to pull off the compressive emphasis as argued by Glenn A. Black ( 2004 ) . The modern twenty-four hours concrete utilizations Portland cement as the cementing component and the sum that is held together by the cement and H2O to plan concrete for different grades of strengths, lastingness, heat & A ; sound insularity, and H2O stringency as argued by Glenn A. Black ( 2004 ) . This makes it clear that the sum is the critical constituent of the concrete that attributes to observe merely the strength and quality of the concrete but besides dictates the nature of the applications and the extent to which invention in technology can be taken to. The cardinal physical quality of the sum is the compressive strength that it can back up for a given composing. The lightweight sums that are researched in this study typically attribute to up to 80 lbs per square inch which is used chiefly applications that demand lightweight concrete by virtuousness of the placement or for the support, insularity etc. specific gravitation is another critical component in depicting the quality of sum as the specific gravitation off the substance is straight relative to its emphasis and squeezability factors as argued by Glenn A. Black ( 2004 ) . A typical combination and most popular in the building industry for the sum is the crushed rock and sand mix at different sizes and squeezability that are used in high demand building structural applications as argued by Glenn A. Black. Hence sum in concrete is defined as the constituent of concrete that attributes to the strength, lastingness, squeezability and insularity properties to back up the coveted building application. Lightweight Aggregate Glenn A. Black ( 2004 ) says â€Å"The term â€Å" Lightweight Aggregate † describes a scope of particular usage sums that have an evident specific gravitation well below normal sand and crushed rock which were at one clip used in about all concrete† . From the above it is clear that the lightweight sum is one of the critical elements that makes concrete flexible and various to do the overall structural design and specifications as to run into the building demands as argued by Leif Berntsson Satish Chandra ( 2002 ) . It is besides interesting to observe that the lightweight sum in the concrete that is made utilizing light weight stuffs besides provide an appreciable degree of squeezability every bit good as possess strength that can be defined based on the composing therefore doing it a versatile and cost effectual procedure in the production procedure itself. The scope of lightweight sum is extended in nature from highly light stuffs used for insularity and non-structural concrete all the manner to expanded clays and shales used for structural concrete. This makes it clear that the lightweight sum in the concrete is chiefly aimed to accomplish high degree of physical stableness and squeezability through efficaciously using the physical qualities of the aggregative stuffs. This is farther justified in the statements of Leif Berntsson Satish Chandra ( 2002 ) who argues that the lightweight sum in the concrete is a major measure towards invention in the field of technology itself. The strength and the air trapped in each single atom of the constituents of the aggregative stuffs are reciprocally relative to each other therefore doing it clear that in order to derive lightweight aggregate the sum of air trapped in the single atoms must be high therefore doing it clear that the strength of the concrete therefore obtained is low. The above relationship stated provides the counsel to guarantee the balance between the air trapped and the strength required in the concrete mix therefore doing the overall lightweight sum concrete customisable to run into the structural demands of the application on manus. Lightweight Aggregate Concrete Spectrum The concrete spectrum ensuing from the usage of the lightweight sum is highly diverse in nature runing from really lightweight sum concrete up to high strength sums dedicated for specific bespoke applications as argued by Glenn A. Black ( 2004 ) . The ace lightweights scope of aggregative concrete that are derived from Vermiculite and Perlite are the capable of presenting weights every bit low as 15 to 20 lbs per three-dimensional pes therefore doing it clear the application of lightweight sums in the technology concern provides a diverse scope of applications for concrete. The natural sums, Pumice and Scoria for illustration can be used to do concrete deliberation at approximately 25 to 30 lbs per three-dimensional pes and extended every bit high as 65 lbs per three-dimensional pes as argued by Glenn A. Black ( 2004 ) . Furthermore, the usage of coal clinkers and expanded shale, clay and slate sums produced utilizing rotary kiln method can present weights in a varying scope from 75 to 120 lbs per three-dimensional pes. Another popular production method for this scope of sums includes the sintering where the weights are delivered typically runing from 90 to 120 lbs per three-dimensional pes. The high terminal applications of aggregative concrete include the production of sums capable of presenting weights up to 150 lbs per three-dimensional pes utilizing the air-cooled scoria sums and the hard-rock sums such as sand and crushed rock and crushed rock, which produce conventional concretes as mentioned by Glenn A. Black ( 2004 ) . From the above it is clear that the sums that lie in the lower terminal of the weight that have lower compressive strength are used chiefly for insularity intents whilst those in the in-between spectrum are used for insularity and filling. The high terminal of the lightweight sum concrete spectrum are used in a broad scope of structural applications that demand high compressive strengths every bit good as efficient direction of weight as argued by Glenn A. Black. The concrete spectrum for the lightweight sum concrete is presented in the figure below Fig 1: Lightweight Aggregate Concrete Spectrum ( Beginning: Glenn A. Black ( 2004 ) ,Lightweight Concrete history, Applications and Economics,Indiana University ) 2.3: Economicss environing lightweight Aggregate Concrete The cardinal facets of Lightweight Aggregate Concrete that attribute to the economical and structural benefits derived through the structural applications utilizing LAC include the undermentioned 2.3.1:Fire opposition– Resistance to fire is one of the critical elements that is expected in concrete to guarantee that the fire opposition and the structural stableness of the civil construction is maintained through the usage of aggregative concrete as argued by John P. Ries and Thomas A. Holm ( 2006 ) [ 5 ] . The fire opposition of lightweight sum is higher compared to the typical concrete sum chiefly because of the fact that the aggregative stuffs composing the lightweight sum have lower thermic conduction, lower coefficient of thermic enlargement as argued by John P. Ries and Thomas A. Holm ( 2006 ) . The fact that the aggregative stuffs possess built-in fire resistant belongingss is the cardinal component that is emphasised and strengthened in instance of the lightweight aggregates where the aforesaid heat opposition belongingss help accomplish higher fire opposition. It is besides interesting to observe that the built-in fire stableness of sum is high and in instance o f the lightweight sum it is at a heat of over 2000 grades Fahrenheit. As it is stated in the â€Å"ACI 216 â€Å" Standard Method for Determining fire Resistance of Concrete and Masonry Construction Assemblies † , when slab thickness is determined by fire opposition and non by structural standards ( Goists, waffle slabs e.g. ) , the superior public presentation of lightweight concrete, will cut down the thickness of slabs ensuing in significantly lower concrete volumes† , ( John P. Ries and Thomas A. Holm, 2006 ) . From the above it is clear that the fire opposition belongingss of the lightweight sum straight contributes to the overall structural stableness and the decrease in the volume occupied by the concrete in the structural applications. This justifies the various nature of the lightweight sum therefore enabling it to be used in advanced structural applications as argued by John P. Ries and Thomas A. Holm ( 2006 ) . 2.3.2: Service Life of the Structure– The service life of the construction is another critical component that is used as step of economic usage in instance of measuring the concrete and the aggregative efficiency against the capital invested as argued by John P. Ries and Thomas A. Holm ( 2006 ) . Glenn A. Black ( 2004 ) further provinces that the lastingness of lightweight sum is high and the life of the constructions constructed utilizing lightweight sum prove to hold higher life lastingness. The historical grounds to warrant the aforesaid include popular constructions likeThe Port of Cosa –built about 273 B.C. where the builders used lightweight concrete made out of natural volcanic stuffs,The Pantheonthat was finished in 27 B.C that incorporates concrete changing in denseness from underside to exceed of the dome and the most popular Amphitheater, built in 75 to 80 A.D. where the foundations were cast as lightweight concrete utilizing crushed volcanic lava as argued b y John P. Ries and Thomas A. Holm ( 2006 ) . From the above statements it is apparent that the lastingness of the constructions designed utilizing the lightweight concrete is extended in nature. Looking into the more modern illustrations to warrant the service life of the lightweight sum used in concrete for building include the lightweight concrete ships built by the American Emergency Fleet Corporation during the First World War. The compressive strengths of the concrete used were in the scope of 5000 pounds per square inch ( 35 MPa ) obtaining a unit weight of 110 lb/ftJ ( 1760 kg/mJ ) or less utilizing the rotary kiln produced expanded shale and clay sum as identified by John P. Ries and Thomas A. Holm ( 2006 ) . The service of these lightweight concrete boats during the universe wars and their subsequent in the merchandiser ships warrant the lastingness and service life of the lightweight sum used in concrete building applications. Furthermore, the fact that the higher degree of air trapped in the atoms make the submergence efficient in instance of the marine applications makes lightweight sum as a natural pick for the Marine applications although the usage of lightweig ht concrete extends to commercial structural applications in many Bridgess across the United States of America where the structural efficiency and stableness on Bridgess that were deemed unserviceable due to hapless burden bearing capablenesss was improved through the usage of lightweight aggregative concrete as argued by John P. Ries and Thomas A. Holm ( 2006 ) . Furthermore, the critical component that attributes to the service life of the lightweight concrete is the heat opposition, opposition to environmental corrosion and its lightweight that reduces the burden on the construction doing its service life longer than the typical concrete applications. 2.3.3: Economic sustainability John P. Ries and Thomas A. Holm ( 2006 ) argue that the structural applications in the modern yearss are judged against the cost, functionality, aesthetics or a combination of these as argued by John P. Ries and Thomas A. Holm ( 2006 ) . This makes it clear that the costs associated with the building of the construction every bit good as the running costs associated with care, infinite and fix are the critical elements that attribute to the pick of a given concrete mix over another. The lightweight sum that is used in the LAC is higher in costs compared to the typical concrete mix as argued by John P. Ries and Thomas A. Holm ( 2006 ) . This is of course because of the demand to bring forth the concrete mix utilizing stuffs of alone physical belongingss and the extent of research and development involved with the overall design of the building application. Alongside, the cost is treated as the cardinal component in instance of commercial execution of building applications preponderant ly because of the fact that the step on the returns in footings of return on investing is attributable when compared against the costs associated with the building of the construction. John P. Ries and Thomas A. Holm ( 2006 ) say that although the capital involved with the building of lightweight constructions is high, the fact that the low care costs and costs associated with other back uping constructions during the buildings like the decrease in steel, girders and besides the decrease in the slab thickness will equilibrate the costs with the production of the LAC concrete mix itself. This farther justifies that the economic sustainability where the return on the investing and the optimal pick for building is accomplishable utilizing lightweight sum as argued by John P. Ries and Thomas A. Holm ( 2006 ) The statements of Glenn A. Black ( 2004 ) that the lightweight sum besides has the benefit of lower degree of care and negligible fixs associated due to its lastingness features farther justify that the effectivity of the lightweight sum in accomplishing economic sustainability is high. Hence the lightweight sum is extremely recommended in the building of critical structural applications like Bridgess and commercial edifice where the burden bearing is high and the infinite is a critical component to salvage costs. 2.3.3: Energy ingestion and energy nest eggs– The Energy Performance of Buildings Directive of the European Union is a classical illustration for the justification that the composing of the concrete and the belongingss of the constituents consisting the construction of constructing commercial and domestic contribute straight to the overall energy ingestion as argued by John P. Ries and Thomas A. Holm ( 2006 ) . This is farther justified in the statements of Sarah Gaventa ( 2006 ) [ 6 ] where the writer has justified that the concrete mix and the design of the overall construction to accommodate the structural demands have a direct impact on the energy ingestion. Alongside, the heat immune belongingss of the lightweight sum and the ability to pin down higher sum of air within the atoms consisting the sum further do the lightweight sum to be able to run into the warming and chilling demands in a given construction as argued by Sarah Gaventa ( 2006 ) . It is besides interesting t o observe that the energy public presentation efficiency in the edifice particularly in the West where a major part of the energy is used for heating intents justify that the concrete mix and the aggregative composing to do the concrete mix are critical for the successful energy nest eggs in the edifices as argued by Sarah Gaventa ( 2006 ) . The lastingness, stableness and other physical belongingss including the squeezability of an aggregative stuff property to the ability of the concrete used in the edifice to retain heat therefore cut downing the ingestion of energy for interior warming intents as argued by Sarah Gaventa ( 2006 ) . It is besides a good known fact that the decrease in the concrete denseness increases the thermic opposition therefore doing it clear that the lightweight sum will increase the thermic opposition due to the lower specific gravitation of the aggregative composing that reduces the denseness of the concrete used in the building of the construction. A typical illustration is the concrete denseness of 90lb/cubic pes will hold a opposition ( R value ) of 0.26/inch whilst the R value for a denseness of 135lb/cubic pes is about 0.10/inc therefore doing it clear the energy efficiency is greatly increased through the usage of lightweight sums as argued by John P. Ries and Thomas A. Holm ( 2006 ) . Chapter 3: Concrete Production 3.1: Overview The production of concrete mix utilizing the sum is achieved through the commixture of the sum, sand and cement with right sums of H2O to bring forth the concrete mix of the necessary strength. The concrete commixture is dependent upon the quality of the sum every bit good as the cement used to accomplish the coveted denseness, strength and squeezability of the concrete for the structural application. In this chapter a critical overview on the cement production followed by the production methods for lightweight sums is presented to the reader. 3.2: Cement Production The chief ingredient for the production of cement is limestone of changing chemical composings that are freely available in the preies as argued by Sarah Gaventa ( 2006 ) . The lime rock is processed and farther chemicals are added to derive the cement of the necessary strength and squeezability. The undermentioned explains the production procedure briefly The natural limestone of changing chemical combinations is foremost collected to fix the natural mix where the limestone is assorted with minerals of minerals incorporating Ca oxide, Si oxide, aluminum oxide, ferrous oxide, and Mg oxide. This mixture is prepared to a all right mixture which forms the natural mix for a typical Portland cement. This is so blended to organize the natural blend where the natural mix is formulated to a really tight chemical preparation to derive the coveted strength from the finished green goods of the cement as argued by Sarah Gaventa ( 2006 ) . The natural blending procedure is conducted in a manner where the comparative content of each oxide in the chemical composing is kept changeless throughout the production procedure in order to guarantee that the belongingss of the concluding merchandise is non altered. It is besides argued by Sarah Gaventa ( 2006 ) really little alterations to the Ca content in the natural mix may take to big alterations in the ratio of alite to belite in the cinder, and to matching alterations in the cement ‘s strength-growth features ( Sarah Gaventa, 2006 ) . This makes it clear that the effectual control of the natural mix is critical for the production of consistent quality cement to run into the demands of the structural application. The following phase is the preparation of the cinder where the blend natural mixture is put through a complex chemical reaction procedure in a big cement kiln with temperature increasing over the length of the cylinder as argued by Sarah Gaventa ( 2006 ) . The concluding merchandise of the procedure is called cinder which is the concluding merchandise of the cement produced in the solid signifier at the coveted chemical combination. This is so put through a cement crunching procedure where the cinder that is produced is assorted with little sums of Ca sulfate to crunch the cement to the desired coarseness in order to back up the structural application. Sarah Gaventa ( 2006 ) further argues that the major constituents that decide on the strength and quality of cement include the undermentionedCinderGypsumLimestoneBlast Furnace SlagThe Blast Furnace Slag is one of the critical elements in lending to the stableness of the chemical reaction in the cement kiln as argued by Sarah Gaventa ( 2006 ) . Another interesting component with the blast furnace scoria is the fact that the effectual usage of the scoria in the cement production procedure besides allows to command the specific gravitation of the cement when assorted with aggregative and H2O to organize concrete every bit good as the ability to make the coveted strength of the cement concrete through the right combination of limestone and gypsum. The schematic of the cement production procedure is presented in the fig 2 below. Fig 2: Cement production Schematic ( Beginning: hypertext transfer protocol: //www.cimnat.com.lb/Production/Model.gif ) 3.3: Sum production The aggregative production is the following critical component in the lightweight concrete readying as the lightweight sum is one of the major elements that must be produced at a higher degree of preciseness in order to guarantee the coveted degree of strength and specific gravitation are achieved as argued by John P. Ries and Thomas A. Holm ( 2006 ) . The rotary kiln method is a traditional method of production which is popular since 1946 as argued by Glenn A. Black ( 2004 ) . The procedure of the production involves the application of heat to shale, clay and slate under controlled conditions. The conditions include the force per unit area and other features that trigger chemical reactions in order to accomplish the preferable specific gravitation and denseness of the sum constituent which is so land to the needed coarseness as argued by Glenn A. Black ( 2004 ) . The sintering method every bit good as the rotary kiln method typically use the similar base natural stuff that comprise of a extremely silicious clay or shale that exhibits a bloating characteristic which is achieve through gas-forming minerals which release gas on exposure to the desired degree of heat as argued by Glenn B. Black ( 2004 ) . It is besides interesting to observe that the readying of the sum is dependent upon the extent to which the force per unit area and the external temperature is controlled that set the temperature-based chemical reactions as argued by Glenn A. Black ( 2004 ) .

Effects of gambling Essay

During people’s life, they develop empirical knowledge about many things. Knowing is the power that everyone has to decide which information is right or wrong to face big challenges and succeed when taking the decisions. All possibilities in this life might be good within the constraints; however, when people take themselves to an abusive level of necessity, it becomes dangerous for them and all those surround them. Gambling has a number of negative effects that distinguish it from other challenging activities; some of these issues are: addictions, family problems and bankruptcy. Gambling is not only a problem in the United States. Gambling is a big problem many other countries such as England and Whales (Department for Culture, Media and Sport, 2002). Reports have proven that over 72% of adults have reportedly gambled within the last year. (Sproston et, al. 2000). Gambling is used like a drug, if people have an issue with family, work, or any worldly problems. The irony of that is, gambling causes family problems, Firstly, gambling is apparently an entertainment industry where many end up being innocent victims of addictions such as alcoholism and lies. Society should be able to resolve its problems without depending on external agents, but people have point breaks. Because casinos provide free alcohol to their customers, they could easily get alcohol problems; while gamblers spend money on their bets, they are drinking alcohol. Compulsive gamblers usually tell lies because they seek to hide their gamble habits; they begin to distort their actions to their partners, friends and even at work. For instance, sometimes bettors gamble in secret, or they do not tell how much time or money they spend; instead, they often create stories to try to justify their activities. Gamblers believe in fake hopes that they will surprise themselves with a big win some day. Compulsive Gambling can be addicted to the adventure of the risk. An addictive gambler is anxious of winning and will tend to play with games that involve other players, so they can feel the adrenaline rush. The most unfortunate consequence of gambling is suicide. Many times have gamblers become depressed because of their financial situation. A lot of gamblers tend to think of themselves as losers. They think that their lives are not worth living and that they are a waste of space in this world. Gambling also brings family problems because gaming causes emotional issues, and it has an impact on children. Whether bettors have just discovered a gambling problem, or they have been living with it for some time; they may feel destroyed by the magnitude of the problem. For example, if gamblers have feelings of desperation, they feel like their assumptions are consumed by the problem they are dealing. They might handle that they need to separate from their couple at least for a period of time. Emotions of this nature are common when they are approaching the complex issues that emerge as a result of a gambling problem. Also, being a person with gambling issues at home can affect children in many ways. For example, gamblers spend less time with their families is due to they invest a lot of time in casinos; therefore, children think that they parents do not love them anymore. These troubles can leave a family feeling frustrated and even worse if the gamblers are fighting over money. It can frighten the relationship. If the family is the core of the society, gambling for any reason could harm the family members because in the family people acquire respect for a moral values in the society. Another negative effect of gambling is a financial crisis; many gamblers accumulate thousands of dollars of debt without knowing. Borrowing money and selling personal items to gamble are signs of aggravated indebtedness. First, Acquiring money from banks and credit cards with the hopes that they can win back their losses is just a way to create long term financial issues for both players and family. For example, while Antony’s wife is fast asleep, Antony spends hours in front of the computer gambling online; authorizing automatic withdraws from his bank accounts and credit cards. They are behind on bills, and the couple gets threatening calls from collection agents on past loans. Thus, his annoyed wife finds that the online gambling losses are the cause that add up to hundreds of dollars a month. Gamblers often say that they do not know where the money is going if they really do not spend too much. Second, Family investments usually are diminished because the gambler seeks more and more resources with which to gamble. For example, a gambler who manages the family finances could liquidate the all family’s properties such as: houses, cars, etc theses possessions may be faded or lost. Consequently, individual beliefs might change when they face beyond their limit, trying to get back their losses. The effects of compulsive gambling are almost immediately overwhelming; gambling can result in uncontrolled cravings, family troubles and economic crisis. Because some people have a low self-esteem they believe that they are not in control of their actions and emotions. Leaders’ thoughts are developed on these false ideas; hence, gambling seeks to control gamblers’ life. Gambling can leave players with devastating effects; as a result, governments can find many solutions the problem associated with gambling. For example, taking an allowance of the gambling revenues and putting it towards rehabilitation programs would be a very positive charity from gambling. For these reasons, governments should find a way to make gambling safer.

What is Psychopathy?

Psychopathy is a problem for society as a whole, seeing that it could easily lead individuals that are suffering from this personality disorder to violent and criminal acts. The bases of psychopathy are known to be biological, sociological, and psychological. Whereas amygdala dysfunction is thought to be responsible for psychopathy, an individual’s frustration with his or her low socioeconomic status may also lead him or her to commit acts of crime revealing psychopathic features in the process. Psychologists believe that low IQ may similarly be responsible for psychopathic behavior. Additionally, they have extensively studied personality traits, such as those on the Big Five personality dimensions, to understand psychopathic traits in particular. Apart from the above, this paper also discusses therapeutic interventions with respect to psychopathy. Introduction In children as well as adults, psychopathy is defined on the basis of three dimensions: (1) an â€Å"arrogant deceitful interpersonal style†¦including glibness or superficial charm, self-centeredness or a grandiose sense of self-worth, lying, conning, manipulation, and deceitfulness; (2) deficient affective experience†¦including low remorse, low guilt, a weak conscience, callousness, low empathy, shallow affect, and a failure to accept responsibility for actions (denials, excuses, etc. ; and (3) an impulsive or irresponsible behavioral style†¦including boredom, excitement-seeking, a lack of long-term goals, impulsiveness, failing to think before acting, and a parasitic lifestyle (debts, unsatisfactory work habits, etc. )† (Cooke & Michie, 2001). No wonder, psychopathy is rigorously investigated with reference to criminal behavior. Psychologists are also very interested in learning about the roots of psychopathy in children. These studies are based on the premise that it is impossible to try to solve a problem without a thorough understanding of its roots. Psychopathy in Literature Blair (2001) explains that the roots of psychopathy may very well lie in amygdala dysfunction. The amygdala is related to the emotional response, in particular, the flight or fight response to threats. With impairment in this essential area of the human brain, the individual is unable to make appropriate emotional responses to threats. The emotional dysfunction in the person suffering from psychopathy is enough to serve as evidence that the parts of the brain connected with emotions are impaired in the case of those suffering from psychopathy (Blair). Moreover, Blair connects the conduct disorder and antisocial personality disorder with psychopathy to describe that there are similarities between the problems. The author adds to our previous definition of psychopathy by stating that those that are suffering from this particular disorder reveal â€Å"emotional shallowness† in addition to antisocial behaviors that are often marked by aggression and taking of offence (Blair). Antisocial behavior is often related to the Intelligence Quotient as well as the socioeconomic status of the person that displays it. Thus, psychopathy may similarly be connected with the IQ and socioeconomic status of those that suffer from it. In particular, those who are less intelligent and who also suffer from lacks due to their present socioeconomic status, may express their emotional frustrations through antisocial behavior, thereby getting very close to the definition of psychopathy (Blair). Rutter (2005) argues that although antisocial behavior is not exactly the same as psychopathy, the importance of investigating the latter lies in the evidence that those that are classified as â€Å"psychopathic offenders† tend to begin their â€Å"criminal careers† at an early age. Besides, these individuals â€Å"are more likely to become persistent offenders than the criminals without psychopathy features† (Rutter). What is more, psychopathic offenders or criminals are often known to be violent and to resist therapeutic intervention. The author also mentions new instruments that have been developed to measure the traits of psychopathy in children as well as adults. These instruments include the â€Å"Antisocial Process Screening Device† (Rutter). Also according to Rutter, child psychiatrists and child psychologists have shown reluctance in diagnosing psychopathy in children and adolescents, based on the belief that the diagnosis might inevitably lead young individuals to bad outcomes in the days to come. On the other hand, it is thought that adults that are suffering from the personality disorder we understand as psychopathy, may have had the problem traits even in childhood. Hence, it is also believed to be easier to start therapeutic programs in childhood so as to help the young in avoiding bad outcomes in future (Rutter). Salekin & Frick (2005) state that young individuals with psychopathic characteristics may be suffering from a particular set of cognitive as well as affective deficits. Knowledge of the â€Å"specific causal pathway† of psychopathy in children and adolescents could prove to be consequential in the design of â€Å"individualized interventions† for such youths (Salekin & Frick). After all, the most important reason why psychologists would like to understand more about psychopathic traits in youths is that these traits help to â€Å"predict future antisocial, criminal, and violent behavior† (Salekin & Frick). Psychologists are also aware that children with psychopathic traits exhibit the â€Å"highest rates of conduct problems, self-reported delinquency, and police contacts† (Salekin & Frick). Salekin, Rogers, & Machin (2001) conducted a study on youths with psychopathic traits. This research was conducted through a survey that was sent out to more than five hundred clinical psychologists, asking them to describe psychopathic traits in youths; gender differences between youths with psychopathic traits; and also the kinds of interventions that psychologists had used with such youths. The results of the study revealed that children with psychopathic features tend to share these features with adults that are also suffering from psychopathy. The mean age of the youngster with psychopathic traits is a little over fourteen years. The average youth with psychopathic features has an 8th grade level education. Moreover, there are more boys than girls showing psychopathic traits. Although the boys with psychopathic characteristics are more aggressive, and often violent; girls with psychopathic features tend to be less aggressive. Such girls reveal their psychopathic traits through antisocial behavior as well as hostility (Salekin, Rogers, & Machin). The study further revealed the prevailing belief of clinical psychologists that it is quite difficult for them to treat psychopathy. Therapeutic interventions are also believed to work more effectively for youths as compared to adults. This is because the personality of children is often thought to be more fluid than the personality of adults. Hence, clinical psychologists reported that they had seen â€Å"moderate-to-marked gains† of psychotherapy in children and adolescents treated for psychopathy (Salekin, Rogers, & Machin). Girls in general were seen to benefit more from psychotherapy than boys. Clinical psychologists found a marked reduction in violence, delinquency, in addition to verbal aggression, even after one year of psychotherapeutic treatment for children and adolescents suffering from psychopathy. Even so, the psychologists reported that antisocial behaviors are sometimes hidden in the natures of the youths and â€Å"outside the purview of psychotherapists† (Salekin, Rogers, & Machin). Hence, this study called for further research to augment our understanding of psychotherapeutic treatment for youths with psychopathic features. Farrington (2005) points out that even though psychotherapeutic treatment for psychopathy should begin early, and should be extensive, there are various problems that make therapeutic intervention difficult. First, â€Å"psychopathy is extremely persistent throughout life,† and so, even though clinical psychologists have observed improvements in youths with psychopathic features after psychotherapy, the problem traits of such youths may not entirely go away (Farrington). Second, psychopathy is also believed to have a biological cause, i. e. amygdala dysfunction, and biological causes cannot be reversed through psychological interventions. Furthermore, psychopaths are manipulative individuals, and they are often able to lie to and deceive psychotherapists so as to become â€Å"treatment-resistant† (Farrington). Farrington also mentions the Big Five personality dimensions that psychologists have often used in an attempt to understand the problem traits of individuals suffering from psychopathy, before they can devise better therapeutic models to help them. The five personality dimensions are: â€Å"Neuroticism, Extraversion, Openness, Agreeableness, and Conscientiousness† (Farrington). Out of these five dimensions, agreeableness, conscientiousness, and neuroticism are most relevant to studies on psychopathy. The author describes how individuals with psychopathic characteristics are expected to fare on the Big Five personality dimensions: Agreeableness includes straightforwardness (with deceitfulness at the negative end), altruism (v. exploitativeness), modesty (v. arrogance), and tendermindedness (v. callousness). Conscientiousness includes dutifulness (with poor dependability at the negative end), achievement striving (v. aimlessness), self-discipline (v. hedonism), and deliberation (v. arelessness). Neuroticism includes impulsiveness and angry hostility, although it also includes self-consciousness (with glibness and shamelessness at the negative end) and vulnerability (with fearlessness at the negative end). Conclusion Indeed, with better understanding of the personality traits of individuals suffering from psychopathy – a problem with biological, sociolo gical, and psychological roots – psychologists are in a better position to help them. Yet, it is bad news for psychotherapists that psychopathy may have a biological cause that they would not be able to work their way around. Moreover, psychopaths are often able to escape treatment by conning and lying during psychotherapeutic interventions. Nevertheless, even the knowledge that psychopaths are able to do this is essential in devising new treatments for them. Our literature review has revealed the importance of understanding psychopathy especially in children and adolescents. Psychologists believe that early intervention is crucial in psychopathy, and youths that are suffering from this personality disorder should be treated extensively. This is because personalities are understood to be more fluid in youth. By helping children and adolescents to change their problem traits, psychologists may be able to save them from negative outcomes in the future. All the same, psychologists have reported that the problem traits of children and adolescents with psychopathic features may never entirely go away. Children and adolescents with psychopathic traits may easily turn out to be criminals in = future. Hence, it is even more important to understand the problem of psychopathy now before better treatments may be developed for the problem in question.

Literature Essay Example | Topics and Well Written Essays - 750 words - 5

Literature - Essay Example However, the real test of creativity and brilliance comes when a person shows creative abilities while remaining in the boundaries of conventions and rules which are set forth for the medium being used. Making things different is not breaking conventions since a broken convention is nothing more than ignoring a long standing rule. Creativity can be reflected in the application of the same rule in a different way going as far as altering rules to produce something which is beautiful because it is imperfect. For example, Shakespeare used the words, ‘most unkindest cut’ which is a grammatically incorrect phase but certainly shows the emotion and feelings of the characters in Caesar. It goes against the conventions of writing but this makes the phrase stand out from many others. In fact, this is not the only time Shakespeare broke away from conventional writing and produced something which has stood the test of time as an example of a masterpiece. For instance, some sonnets of Shakespeare go against several rules followed by sonnet writers in the Jacobean era even though Shakespeare himself was responsible for creating many conventions followed in the same times. His work, Shall I compare thee to a summer’s day is a perfect example of a conventional sonnet by Shakespeare. The sonnet has four stanzas with three quatrains, the final couplet is composed in iambic pentameter and the rhyme scheme is perfect as abab cdcd efef gg. In fact, the system used for such sonnets have come to be known as the system for Shakespearean sonnets (Wikipedia, 2006). It is commonly accepted as one of Shakespeare’s most beautiful sonnets because it does not break any conventions but comes out as a very creative and different effort from the rest of the poetry by the bard. Shakespeare does not always play by the rules set out by him and can offer variations and changes depending on how he wishes. In a few other sonnets, there are significant departures made from

Strategic financial plan for a non-government organisation (NGO) over Essay

Strategic financial plan for a non-government organisation (NGO) over the next 3 years - Essay Example The organization has a target of seeing the society in question who feels endowed to cater for the needs of the children. In achieving this, the organization builds the potential of the society groups and operates with them as supporters in giving the youth and children with life and wellbeing chance to enhance the opportunities. The organization has been working in conjunction with the locally based NGO’s in the locality with a mutual vision which is to provide the youth and children in the Kenyan Community a just start to life. This is after the youth were not satisfied with the manner in which the majority of NGO and charities in the locality were going about in supporting susceptible children. The organization was registered in 2006 as a community based organization in Kenya and as a charity in the U.K while in 2009 it was put on authenticated as an NGO in Kenya. For each pound given to the NGO 97 % is spent in running programmes that enhance the youth and children’s life and the remaining 3 % is used to raise the next one pound. Organizational Structure The long-term partner for the organization is Wereldkinderen which has vowed to continually support the activities of the organization with a determination to promote the group in enhancing the enforcement of social group projects in more th an 16 societies for the next coming 5 years. There are plans for the projects which foster the business to influence more on the children and communities. There are three more communities which the organization intends to work with and support their programmes of which Chello Foundation has promised to offer support for more 166 scholars by the onset of 2012. Scholarship program Community based programs Sports and health program Children support program Donor Chello Foundation & Private Individuals Wereldkinderen & Liberty Foundation Private individuals Churches and private individuals Duration Since January 2007 up to date Since April 2008 up to date Since 2006 up to date Since 2006 up to date Number of beneficiaries 391 but set to increase 750 also set to increase 1200 but set to increase 66 but currently set to rise Approach and Aim To equip the most disadvantaged children and youth with secondary, post-secondary and vocational education to enable them be independent in life To s upport the community based projects which will boast their living standards hence alleviating poverty in the communities To enhance a healthy lifestyle and health awareness with susceptible children and youth at risk. To give support to orphans and vulnerable youth to enable them be independent and live a successful life Jacquie Cheung is very handy in operating over all sites in an effort to enhance the systems of reporting which has rapidly improving the financial, operational logging and mechanisms of reporting. The organizational new compliance officer is Jonathan Barlow who has a Masters in political economy of late development from the prestigious London school of economics. He has a vast experience through his extensive travel over the Sub-Saharan nations. Significantly, Jacque who has since taken over from Jonathan as a trustee with the WVP Kenya is more than willing to work with other staff in Kenya. The organization has plans to expand their potential and capacity for the operations in Kenya where more members will be brought on board such as volunteers and staff to help in the process of expansion. Funding and Future Financing Of Different Programs Dorridge Methodist church has been instrumental in giving charities to the organization. Being

Arab and Israel Conflict Essay Example | Topics and Well Written Essays - 1000 words

Arab and Israel Conflict - Essay Example icinity and beyond - forcing them to define their respective principles of national security in the context of balancing levels of political linkage across a multitude of conflict events." (Feste 1991, P xv). Therefore, the Arab-Israeli conflict has been influenced by several essential elements of the socio-cultural and religious life of the Arabs and the Jews and the process of negotiation was greatly affected by these factors. It is fundamental to make a reflective analysis of the history of negotiations and the role of international community at reaching a settlement in the Arab-Israeli conflict. A profound exploration of the history of the Arab-Israeli conflict indicates that the scope of negotiations has always been open in the conflict. As the people of the Middle East have been unsuccessful in establishing a stable and settled system of nation-states in the region, the assistance of the Great Powers of the world has often been sought for. The negotiation processes always incorporated non-violent CMTs, diplomacy, and force. "In the Arab-Israeli conflict, negotiations and nonviolent CMT are part of an overall strategy combining diplomacy and force. The combined use of diplomacy and force was the most common form of crisis regulation in the Arab-Israeli conflict." (Ben-Yehd and Sandler 2002, P. 65). There were significant attempts by the Great Powers of the world

Carbon fiber & glass fiber research (formula student car body) Coursework

Carbon fiber & glass fiber research (formula student car body) - Coursework Example Though the ribbons are primarily parallel on the surfaces of a carbon fiber, the inner layers of the fiber fold during a "hairpin† fashion. This is quite distinct to graphite in which the carbon sheets remain parallel. The great strength of carbon fiber is attributed to the interlocking and folding of ribbons (Mahrez, Mohamed & Katman, 2005). This means that the carbon atom sheets cannot slide past one another as in graphite. Carbon fibers are produced through controlled pyrolysis of organic precursors. Through the heat treatment of the precursor oxygen, nitrogen and hydrogen are removed and carbon fibers remain. Mechanical properties of carbon fibers are enhanced by increasing the orientation and crystallinity, and through reducing defects within the fiber (Moran, 2004). The most effective way to achieve this is to start out with a highly oriented precursor and then maintaining the high orientation in the stabilization and carbonization through tension. The two main applications of carbon fibers are in specialized technologies, that include nuclear engineering and aerospace and normal engineering which embrace engineering elements like bearings, gears, fan blades, cams and automobiles (Oribi Manufacturing, 2011). There are new applications of carbon fibers like rehabilitation of a bridge in building and construction, decoration in aviation interiors, musical instruments and automotive and also after-market transportation merchandise (Oribi Manufacturing, 2011). The conductivity of carbon provides extra new application in electronic industry. The table below illustrates a number of characteristics and applications of carbon fibers. Glass fiber is a flexible glass material. The basic building block of glass fiber is a mixture of silica sand and other ingredients like borates. Glass fiber in fabric gives the best combination of properties like high strength and fire resistance. Its

President Obama and the Financial Reform Research Paper

President Obama and the Financial Reform - Research Paper Example It has also enacted the Volcker Rule based on the advice of Paul Volcker a former Federal Bank’s Chairman and headed Obama’s Economic Recovery Advisory Board. Although many are skeptical of the features and progress of the new Act, the law is understood to be more stringent on the unregulated trading and risk-taking by the financial corporations.   There have 3 major financial reforms in US history preceded by the recessionary phases and accounting scandals. First, the US economy faced the worst financial crisis since the Great Depression in 1929 as a result of which the Glass Steagall Act came into existence in 1933 which legislated the separation of commercial banks from investment banks. Senator Carter Glass was responsible for bringing the Act who believed that the commercial bank’s direct involvement with dealing in corporate securities was a threat to the financial system stability. Since then it has been the topic of research for many economists (Clark, p.205). Second, in 2002 the Sarbanes Oxley Act was signed in the wake of global corporate and accounting scandals such as Enron, WorldCom and Tyco International (Slander, p.1). The Act contains provisions of corporate governance and auditor’s independence and led to the creation of quasi-public agency Public Company Accounting Oversight Board which was responsible for regulating and overseeing the accounting firms as external auditors. Third, the most important reforms, the Dodd-Frank Wall Street Reform & Consumer Protection Act has been enacted in 2010 by President Barack Obama and his administration. The law has led to the creation of two important oversight bodies- Financial Stability Oversight Council and Consumer Financial Protection Bureau. The new Act is considered by many to be based on the Glass Steagall Act. Global Financial Crisis 2007-2010 The Global financial crisis started with the bankruptcy of investment bank Bearn Stearns Inc in 2007 due to heavy exposure to mortgage-backed securities, central to the subprime mortgage crisis. The bank was sold to JP Morgan Chase. Then the collapse of Lehman Brothers, the fourth largest bank in America was followed, which unfolded the global financial crisis. All those financial institutions which had exposures to the collapsed bank’s short-term assets faced the liquidity crunch. The largest insurance firm AIG faced the liquidity crisis in 2008 because its credit ratings were downgraded.  Ã‚  

Imagining the Nation in British India Term Paper

Imagining the Nation in British India - Term Paper Example The prohibition of the practice in the year 1829 was considered to be an important step towards the emancipation of the Indian women. It is argued by Lata Mani that the women who were central to this practice had no role in the debate and the controversy was more about the meaning of Hindu tradition, the place of worship and the role assumed by the colonial state. She questions the motives of the British in the abolition of the practice. In her writings, she has shown how the colonial bureaucrats were divided in the intervention in the practice on the ground of the political implications of the issue. The role of the British in the mediation in a local matter cannot be considered as one based on humanitarian grounds. The author questions the objectives of the mediation as the practice of sati was initially condemned by the British but was later covertly approved by them and as a final stand they banned the practice officially. This transformation of stand only proves the views of the author that the acts of the British were not one based on humanity but were influenced by vested interests. When they understood that the open denouncement can cost them politically they approved it but later on in a bid to establish their political supremacy in a foreign country they banned the practice. Lata has also highlighted the scriptural interpretation related to widowhood. She explains how Rammohun Roy, a nineteenth-century noted Bengali reformer, interpreted the scriptures. The scriptures refer to the prescriptive tests that describe the rules of social living. Lata viewed these interpretations as an understanding mode that developed side by side along the colonial rule. Rammohun Roy highlighted that as per the brahmanic scriptures the sati can only be voluntary without any coercion. In her work she has also tried to draw attention to the role of Walter

Nutrition Paper Essay Example | Topics and Well Written Essays - 1000 words

Nutrition Paper - Essay Example They believe that they are inadequate. People who view themselves critically are more prone to develop anorexia. Research on the biological causes of anorexia suggests that people with high levels of cortisol and low levels of serotonin and norepinephrine have a tendency towards anorexia since these hormones control stress and general well-being of a person. Also some people are genetically prone towards the disease if it runs in the family (Shepphird, 58). The first stage of Anorexia as identified by research is when a person loses a good amount of weight in a relatively short time period. This is then followed by praises from friends, families and acquaintances. The patient gives too much worth to these praises and starts fearing an increase in weight. This then develops an obsession among the patient to limit or reduce weight. From herein begins, the disease process. In the early stages, the patient develops a compulsion towards physical exercise. Exercise starts taking up most of the patient’s time and he ignores his social life. At the same time, the patient starts obsessing about food. They start researching about food, calories and diets. They even try to implement these in their own diet and often try to hide these details from their friends and family. In the second stage, the patient becomes preoccupied with his body image. He starts focusing on individual parts of his body where he assumes that he needs to lose weight. The person feels basically fine in his stage but starvation is becoming quite common in the second stage. The third stage occurs when the patient starts to starve himself. He starts wearing warmer clothes as starvation leads to cold. The patient also displays many other emotions as a direct result of starvation. These include depression, anxiety, paranoia, irritability, insomnia and exhaustion. It is difficult for immediate friends and families to ignore Anorexia Nervosa. The symptoms appear on the

Examine sociological explanations Essay Example for Free

Examine sociological explanations Essay There seems to be a direct link to what goes on in schools and what takes place at work. The functionalist approach to education and economy is that through socialisation education helps maintain society by introducing young people into values and beliefs such as achievement. They argue that education teaches what is needed within the world of work like numeracy and literacy skills or specific skills for particular jobs. The education system allocates people to the most appropriate jobs, which suits their abilities using examination results. Through the eyes of the functionalists this is seen to be fair because there is an equal opportunity for everyone, everyone has the chance to succeed in society on the basis of their ability. If they work hard and try hard at school then they will succeed and climb the social ladder obtaining a higher social status. They see education as turning pupils into model citizens that the most able pupils will succeed and obtain the most important jobs. Durkheim stated that education performs the function of making individuals feel they are members of a social group. This can be done through lessons such as history. He believes that school teaches pupils how to co-operate and work with others. The subjects that are taught in schools are related to skills that are required for work. The education system sifts and sorts the people according to their ability and that those who want to achieve can do so despite social class or background. Parsons thinks that the school is the first place where they are taught universal values and rules. School helps introduce a consensus; this is where everyone agrees on the same basic values. Schools challenge pupils abilities and their talents so that they can be issued into specific jobs. Davis and Moore explained that some people have greater talents than others and to ensure that society functions efficiently the most able individuals are allocated the most efficient jobs. The education system is responsible for this, targeting the people who are most able then training them for important jobs. However, some people would argue that this is far too optimistic. This idea of meritocracy is untrue does not exists. There are certain barriers that get in the way the main one being social class. An example of this is careers such as medicine and law where certain firms will not accept you if you have been to a university that was previously a polytechnic college. There is nothing wrong with these universities but certain people and groups see them as lower class and therefore less likely to employ them. This is a barrier that gets in the way. There is a lack of evidence that schools teach work specific skills, an example of this is how often does a job require you to know quotes from Shakespeare, some subjects have a limited usefulness to the world of work. The principal of having a general consensus in school is not always the case; different social groups have different sets of values. Marxists disagree with this approach stating that its main function is to maintain, legitimate and reproduce, generation after generation of inequalities transmitted through common values and beliefs. Failure and inequality is encouraged within working class people, this is taught in schools. What goes on in school is related to the world of work, the pupils are like the workers and the teachers are like the bosses. Marxists explanation of education is that it does entirely depend on intellectual ability only the pupils who conform will rise above the rest. Schools reproduce the appropriate work force with the correct attitudes for factory work. They argue that it turns working class kids into conformists workers. Marxists argue that a hidden curriculum lies within the education system that filters out working class children into working class jobs it is a passive process that gets them used to this idea of inequality and hierarchy. It makes them accept it and not challenge it this is the correspondence principal. Bowles and Gintis argue that what goes on in schools is directly related to the world of work. The organisation of school to that of work is very identical, separate school lessons mirroring separate work place tasks. The examination results and payment are the enjoyment of working and learning. Educational success and promotion at work is based on work. Again what was just said isnt always the case. Bowles and Gintis never actual got any research evidence to support their claims. Most jobs now demand people with flair, ambition and people with charisma not mindless idiots as Marxist stated. Not all schools respond in exactly the same way and not all pupils respond in exactly the same way as Bowles and Gintis suggested. Not all children are passive products of the education system it might motivate some children with the thought of ending up in a factory. Paul Willis conducted his survey in 1977 and provides internationalist approach to understand the meanings pupils. Willis identifies pro-school and anti-school subcultures. The anti school subcultures where nicked named the lads ands the pro-school subcultures were called the earoles. Willis was a neo-Marxist who stated that the lads developed strategies to cope with the boredom of school and basic routine that they would eventually end up in at work. The lads chose to and accepted themselves as failures and didnt see the point in trying so just gave up. It was not passive as Marxists first thought. Even this type of attitude created the right workforce, they were uncritical and just got on with it. Paul Willis focuses on actual working at the school. One criticism of Paul Willis work is that either the student rebelled against the system or they conformed they were never really in between and this didnt really make much sense. It was unrealistic not many people were 100% in a category they were in between and this didnt show up in Willis results. Vocational Education was introduced because when students left school and went to work they didnt really possess the appropriate skills for work or the correct attitude. Vocational education changed this and improved their working attitudes with ideas such as work experience. As part of Curriculum 2000 key skills were introduced, this was asked for by a lot of employers and it gave students a basis insight into how to use a computer. A number of other schemes were introduced for those post 16 student s who didnt want to stay on at school, the government would pay half their wages and the company that employed them would pay the other half. This was great for the company because they were getting labour for half the price and once they had got to 19 they would sack them and employ another 16 year old. The schemes led to low paid and low skilled part time employment. The main aim for the government to set this scheme up was so that when it came to Election Day it meant that the number of people who where unemployed was low. There was first an assumption that unemployment was caused by a lack of skills amongst young people. In actual fact it could be to do with lack of jobs. Cohen stated that this attitude and discipline training made the post 16 people ready to except low paid jobs. In conclusion there is no one simple explanation about the relationship between school and economy. All of the information featured is theories and beliefs based on different perspectives. Up to a certain point all of the theories are true and probable in certain situation. No one can speak for the whole of society what happens in one group might be completely different to another. I would however be incline to put my trust in to a lot of what Paul Willis says partly because of the way he carried out his study, it was very in-depth.

Oregon State Printer Essay Example for Free

Oregon State Printer Essay The early history of the people who held the position of state printer reveals how closely tied the position was to the publication of newspapers. Asahel Bush (see photo) established the newspaper the Oregon Statesman, an important voice for the Democratic Party, in 1851 (Oregon Historical Society). He was named State Printer in 1859 (Morrison). Asahel Bush (1824-1913), first State Printer (Oregon Historical Society) Eugene Semple was the editor of the Oregon Herald from 1869-1873, and he assumed the position of State Printer in 1872 (Corning, p. 219). From 1894-1901 (at least), the State Printer was W. H. Leeds. Leeds founded the Tidings, a newspaper in Southern Oregon in 1878 and accepted the nomination for State Printer in 1894 (Larson). Others who held the position include Henry L. Pittock (1862), T. Patterson (1870), W. A. McPherson (1870), W. P. Keedy (1880), W. H. Byars (1885), Frank C. Baker (1893), and J. R. Whitney (1903). These names are found by perusing lists of works published by the State Printer, as these works bear the name of the printer in the bibliographic information. Oregon State Print Shop, 1890 Changes to the Position and its Oversight The 1857 Constitution calls for the State Printer to be an elected official, however this situation changed in 1913. In this year, the office of the State Printer became part of the Board of Control where it remained until the 1960s (DAS, p. 2). At this point, the State Printer was managed by the State Printing Board, a group comprised of Board of Control members (DAS, p. 2). The Printing Board was responsible for appointing the State Printer (DAS, p. 2). This is an important change in the position of State Printer, as previously this had been an elected position. In 1967, responsibilities for state printing were transferred to the Department of General Services (DAS, p. 5). From 1971 to 1973, there existed, as part of the Department of General Services, a Task Force on State Printing (DAS, p. 6). House Bill 2235 eliminated the position of State Printer and assigned the Oregon Department of Administrative Services to perform the duties of State Printer (House Bill 2235, 2001). The Department of Administrative Services was created in 1993 by combining the Department of General Services and the Executive Department (DAS, p. 1). Printing services are executed by the Procurement, Fleet, and Surplus Service Division of the DAS (DAS, p. 12). These numerous changes to the position and its oversight were discussed by the House Committee on E-Government in 2001. As Fariborz Pakseresht explained, mergers in the 1990s had essentially abolished the position of the State Printer (Minutes 2001). One problem with the position was the necessary experience, required by the Constitution. As State Printer Mike Freese asserted, the ten-year experience requirement for the position of State Printer was considered outdated (Minutes 2001). Additionally, Representative Lowe brought up economic and ecological issues when he questioned whether changes to the position would end up saving the state money and would be more ecological in reducing paper consumption (Minutes 2001). Despite all of these changes, in 2005, the position of State Printer still existed as Mike Freese is listed as State Printer in minutes from meetings in both 2001 and 2005 (Minutes, 2001 and 2005). Indeed, the 2008 version of the Oregon Constitution still provides for the position of State Printer: Laws may be enacted providing for the state printing and binding, and for the election or appointment of a state printer, who shall have had not less than ten years’ experience in the art of printing. The state printer shall receive such compensation as may from time to time be provided by law. Until such laws shall be enacted the state printer shall be elected, and the printing done as heretofore provided by this constitution and the general laws. (Oregon State Archives, 2008 Constitution). What is intriguing about the wording of this article from the Constitution is that it seems to be deliberately vague: the State Printer may be elected (as in the 1857 Constitution) or appointed (as it was since 1913). Furthermore, this article still calls for the ten-years mandatory experience in the field that Freese had questioned in 2001. Duties of the State Printer As noted in the Constitution of 1857, when the position was created, the State Printer is responsible for all public printing for the State of Oregon. According to House Bill 2235, priority is given to the publication of materials related to the work of the Legislative Assembly (including its officers and committees). In addition, the inaugural address of each new governor is required to be printed by the DAS. The Department of Agriculture may, but is not required to, use the DAS to publish reports and statistics. In accordance with House Bill 2235, any material that advertises or promotes products does not fall under the domain of this position (House Bill 2235, 2001). Another duty of the State Printer is revealed in House Bill 2235. This Bill reveals that the State Printer had previously held the task of printing the register of firearm ownership (House Bill 2235, 2001). This responsibility had been transferred to the State Police in 1991 (Senate Bill 32). The State Printer also published volumes containing biennial reports from the State Penitentiary, from 1868 to 1913 (Oregon State Archives, Department of Corrections). In House Bill 2235, the duties of the State Printer that the Department of Administrative Services is now responsible for include the following: control and manage all state printing, control all state printing purchases, determine and fix the price for all work done by those in this position, produce multiple copies of documents, purchase equipment for duplicating documents. Economic Issues As noted above, Representative Lowe had wondered in 2001 whether changes to the position of State Printer could save the state money. This seems to have been a concern for other government officials as economic concerns are frequently mentioned in debates about the position. In 1921, a law was enacted which allowed state offices outside of Marion County to do business with private enterprises that could underbid the State Printing Department (DAS, p. 3). It appears, however, that agencies had sought to do business with out-of-state companies. This ironic situation, with out-of-state businesses printing Oregon State documents, was addressed in 1931. In this year, this law was further amended with the provision that these outside contracts must be for businesses in Oregon unless the prices quoted by these businesses were â€Å"excessive and not reasonably competitive† (DAS, p. 3). House Bill 2235 still allows for some of the printing work to be contracted out to other businesses. This Bill reveals that state agencies are not required to use the services of the State Printer (or, in this case, the DAS) if they can demonstrate that the same quality work can be found for a lower cost (House Bill). This contingency is, as Mike Freese explained, a guard against individual agencies setting up small, inefficient printing shops (Minutes, 2001). The State Printer and Dissemination of Information In addition to fulfilling public printing for the state, the State Printer had other tasks that demonstrate how vital this position was to the dissemination of government documents and to making these documents available to the general public. In 1907, Senate Bill 136 was passed. This bill required the State Printer to deposit copies of state publications at the State Library (Wan). In the early history of the depository program, numerous copies of the documents were submitted – up to 50 copies of legislative bills and calendars, and 125 copies of legislative interim committee reports (Wan). However, in 1979, the number of copies that the State Printer was required to submit to the library was standardized. From this point, 45 copies were required to be sent to the State Library (Wan). In 1994, more changes were instituted to the depository program, led by members of the Documents Interest Group of Oregon (Wan). In 2001 (according to House Bill 2235), 45 copies were still required to be submitted to the State Library. Since July 2006, the Oregon State Electronic Depository has been in operation. This program aims to collect and archive electronic versions of state documents so that information that is held on the web does not get lost when pages are updated. Individual agencies are required to submit electronic copies of the appropriate documents to the Oregon State Library (Wan). However, agencies are still required to depose ten hard copies of each document (Wan). The publication of state documents is documented in the quarterly Checklist of Official Publications of the State of Oregon, published by the State Library beginning in the 1960s (Wan). This publication ended in 1979 and was replaced by a microfiche edition of the library’s catalogue (Wan). The microfiche catalogue, however, was short lived and stopped being produced in the 1980s (Wan). Through the interaction of the responsibilities of the State Printer with the library system, we can see how the tasks of the State Printer affected the general public. References 71st Oregon Legistlative Assembly. (2001). House Bill 2235. Retrieved May 31, 2009 from http://www. leg. state. or. us/01reg/measures/hb2200. dir/hb2235. intro. html. Corning, H. M. (1989). Dictionary of Oregon History. Portland: Binfords and Mort Publishing. Department of Administrative Services. (2003). Administrative Overview May 2003. Retrieved May 31, 2009 from http://arcweb. sos. state. or. us/recmgmt/sched/special/state/overview/20020011dasadov. pdf. House Committee on Advancing E-Government. (2001). Minutes. Retrieved May 31, 2009 from http://www. sos. state. or. us/archives/legislative/legislativeminutes/2001/house/advancing_egovernment/HAEG02_2. htm. House Committee on General Government. (2005). Minutes. Retrieved May 31, 2009 from http://arcweb. sos. state. or. us/legislative/legislativeminutes/2005/house/gengovernment/hgg0210. htm. Larson, T. (2006). W. H. Leeds. Retrieved May 31, 2009 from http://boards. ancestry. myfamily. com/surnames. leeds/212/mb. ashx. Morrison, S. B. (2005). Salem Online History – Asahel Bush. Retrieved May 31, 2009 from http://www. salemhistory. net/people/asahel_bush. htm. Oregon Historical Society. (2002). The Oregon History Project – Asahel Bush. Retrieved May 31, 2009 from http://www. ohs. org/education/oregonhistory/historical_records/dspDocument. cfm? doc_ID=7FB69DC4-1C23-B9D3-684905C8E0A57C86. Oregon State Archives. (2009). Crafting the Oregon Constitution: Transcribed 1857 Oregon Constitution, Article XII to Article XVI. Retrieved May 31, 2009 from http://arcweb. sos. state. or. us/exhibits/1857/learn/transcribed/trans9. htm. Oregon State Archives. (2009). Constitution of Oregon, 2008 Version: Articles XII through XVI. Retrieved May 31, 2009 from http://bluebook. state. or. us/state/constitution/constitution12-14. htm. Oregon State Archives. Department of Corrections Records Guide. Retrieved May 31, 2009 from http://arcweb. sos. state. or. us/state/odc/scope/scope. htm. Wan, J. (2007). History of the Oregon Document Depository Program. Retrieved May 31, 2009 from http://www. oregon. gov/OSL/GRES/ordochst. shtml.

Impact of Non-Financial Resources

Impact of Non-Financial Resources TASK 1. Physical resources are the tangible resources used in a certain company or an organization. These resources makes their work processes more appealing and efficient. One the other hand, technological resources are the resources in which an organization or company uses to promote and increase efficiency in the company, sometimes these technological resources can also be used for security purposes. The following are the physical and technological resources needed in Mohammed’s company dealing with advertising and publishing:- The physical resources needed are: a building or a rented shop. The location of this building has to be in an area where it is possible for people to notice the company. The best area is in Qurm since there are a lot of residential areas, schools and other companies around that area. It is a busy area so if the company is located that area, it has a high possibility of being known all over Muscat and in couple of years it will expand to all around Oman if the business goes as planned. He should rent a shop for a while until the business goes well and in the meantime he should continue finding another area of which he should have his own building and not rent for his whole life since his business won’t be small for life but expansion of his company is his mission in life. Furniture. Furniture such as office tables and chairs are essential in a company. These furniture are the ones that provide appealing environment for a customer when entering the office. For instance, a customer gets in the office and already explained his/her problems to the receptionist and was told to wait, he/she would definitely expect to see a sofa or a chair in which he/she can sit as he/she was told to wait. The work environment also needs these furniture since a computer cannot just stay on the floor and expect a customer to deal with that company after seeing that. Appearance of the work area by the use of furniture is an essential thing to consider when starting up a new business. Fahmy Furniture LLC is the best place to get these furniture from since they have good quality furniture with reasonable prices. Filing system is also needed in certain situations so, shelves are also appropriate and can be also found in this company. Toilet equipments. These are essential because every human has to visit the toilet eventually at any time. These can be kept in both male and female sections of the toilet since the toilet cannot be bisexual and used by both genders. These can be bought from any local dealers who have provide with good quality and affordable prices. Toilet equipments meaning sinks and the actual toilet in which a person uses for specific reasons and the sink to wash hands after the usage of the toilet since it is healthy to do so. Safety equipments. In any company, there always have to be safety precautions in case of any emergency occurs. Safety equipments such as fire extinguishers should be installed around the office in case of any fire outbreak that might happen. These fire extinguishers have to be the ones that can switch off fire of any class. In publishing, papers are needed so as to portray all the work that a person kept effort in when wanting to advertise something that a person hired the company for. These papers are special since publishing a pamphlet or brochure isn’t done by normal A4 papers but with a required paper material needed for the process to take place. These papers can be bought online or imported from out of Oman and reach the office for the publication to take place. The company should have a trademark and a copyright protection that will avoid other people to use the same mark as their own. According to Wikipedia, â€Å"Trademark law is designed to fulfill the public policy objective of consumer protection, by preventing the public from being misled as to the origin or quality of a product or service.† The Omani Copyrights laws will actually help in this kind of situation since whenever someone copyrights the company’s work, the company will always be protected by having the law on their side. Technological resources needed include communication devices such as telephones. These devices are important in a way that the company is able to communicate with their clients in the progress of their work. Also communication is available to those people who are interested in knowing more about the company and wanting to know where it is located and making appointments. A contract with Oman Mobile will be suitable since they provide better landline services than any other networks in Oman. Computers. Computers are needed for the operational activities of the company in the process of advertising and publishing what a client hired them for. These computers are installed with a publishing software which it makes it easier for the designer to complete his/her work in a short while. Bear, J.H (n.d), â€Å"Desktop publishing software allows the user to rearrange text and graphics on screen, change typefaces as easily as changing shoes, and resize graphics on the fly, before finally committing a design to paper.† Computers are used when designing features that can be kept in brochures and pamphlets. Websites. A website is there to provide awareness of the company’s information. Since the technology is developing and most people are always surfing the internets, it is easier for them to know about the company online than going to them and ask them about their information. According to Wikipedia, â€Å"Electronic publishing has become common in scientific publishing where it has been argued that peer-reviewed scientific journals are in the process of being replaced by electronic publishing. It is also becoming common to distribute books, magazines, and newspapers to consumers through tablet reading devices, a market that is growing by millions each year,[1] generated by online vendors such as Apples iTunes bookstore, Amazons bookstore for Kindle, and books in the Google Play Bookstore.† Instagram accounts can be useful sometimes since it’s a new application and most people have it, they will be able to see the quality of publications and the previous contracts they had. Publication machines such as printers. These printers are used in the publication processes that requires brochures to be spread for the knowledge of what the client asked the company to advertise about. These publications act as an advertising tool and also advertising can be done through websites but all of these are choices done by the client himself/herself. Smoke detectors. In case of fire outbreak and nobody notices, the smoke detectors will detect the smoke since fire produces it. These smoke detectors will be installed with a water system which will automatically activate when there is fire in a certain area and an alarm will go on to alert the employees about it so they can put it off as soon as possible so as to avoid destruction of properties in the office. Projectors are needed so as to present what will be done to the clients. This presentation is to confirm what the company is doing and the client to say if it is okay or something else should be done with the publications and the advertising as per the contract agreement. Security cameras. These are to be installed so as to know every single person who came in the office and went out, and whenever something bad goes wrong such as theft, the cameras will definitely show you who did it since they record everything that’s happening in the office. In conclusion, the company will work according to efficiently since it has all the technological and physical resources. This will also depend on the human resources present in the company for the operations to work as planned. Without human resources, there won’t be a company since they are the ones responsible in operating all physical and technological resources. TASK 2. Human resource management is the process of hiring people who are qualified for a specific job. In order for Mohammed to manage the human resources, he should put job vacancies available for people to apply for. He can advertise them through newspapers, magazines or websites. Job descriptions and personal specifications are provided in these advertisements together with a job application form details on where to find them if they are not attached in the advertisement. After they apply, they are to go to the company for a job interview and go through a specific course if necessary. The person has to have all the necessary skills both personal and employability so as to get the job. If he/she passes the course, it is when he/she sits to discuss about the salary and starts to work after given a specific date to begin. Mohammed should know how to motivate his employees in remaining in the company for a long period of time. This process is called retention.Business Burrito (n.d), â€Å"When people arent motivated, they become less productive, less creative, less of an asset to your company.† He should have a promotion system by which an employee earns it for his/her hard work to the company. This will motivate other employees to work harder providing more work force to the company and the company to be known more by others and at the end they get their rewards on their hard work. Training should be provided to the employees through taking them to courses concerning a certain task since technology changes after a period of time. These courses can either be indoor or outdoor. Indoor meaning inside the country and city and outdoor meaning in a different country. Training Today (n.d),â€Å"Training is crucial because it: Educates workers about the effective use of technology, Ensures competitive edge in the market, Promotes safety and health among employees, Creates opportunities for career development and personal growth, an important factor in retaining workers Helps employers comply with laws and regulations, and Improves productivity and profitability† Through having this new knowledge on a certain job, it is easier for the company to attract more customers since the competitors won’t have the knowledge but when they know that the company has it and it is useful, they would go obtain the knowledge so as for the competition to be stable. Security guards are there to protect theft from happening. Competitors might act in unethical manner and hire people to steal things from the company and eventually getting them. Itcan happen when clients’ competitors would want to destroy the publications and eventually break in the company so as to get them. These guards are there to protect anything from happening to the company at any time. Physical resources are there to provide a good and appealing appearance to the society. These resources are noticed by people and they are satisfied by what they see so they agree to deal with the company. These people will spread the word to others and fortunately the company will gain more clients than before. The physical resources such as computers and printers makes work much easier and effective because they are essential in this kind of business that using free hands in drawing on papers and use them as publications to advertise to other people. This won’t generate a lot of clients because they would think that the company is too old fashioned and cannot afford the modern technology and has no knowledge of it. Technological resources improve the performance of a company in such a way that protection is provided to them through the security cameras and smoke detectors. This makes the work conditions safe for the employees to do their jobs without any threats coming between them. Having publication machinery makes it possible for work to be done in a certain period of time without asking other people to do it for you and pay them at the end. The machines help in production of the publication in a short period of time and get on with the next employee’s agreement. Good quality publications that are advertised can lead to the attraction of more customers into the company. Projectors will provide update to the clients through the presentation that is prepared by the company on what the company is getting at in the process of publication. The communication devices will make it possible for communications between the company and the customers when it comes to appointments and informing them on where the process of publishing and advertising has reached. This makes the customers to have trust which is a good thing and get to spread the word to others. In conclusion, all these human, physical and technological resources are very important things in a company. They cannot work without each other so without one, the other won’t work as effective as it used to be and the company won’t be successful as it hoped to be. TASK 3. It is true that managing resources and controlling budgets costs can improve the performance of the business. This happens when controlling a budget costs can also control the resources in a company which are all human, physical and technological resources. Consider human resources, instead of having more employees a company can only have two employees. Since Mohammed is the owner of the company, he has to recruit two employees who are able to do all the work needed in advertising and publications. Since the technology is growing, the only thing needed to know is how to design and put it out online for people to see it. They should have skills like sales and computer designs in conducting this kind of business. Courses are to be given to them if they lack one of these skills to reduce the cost of more employees and save money in paying more instead you just pay the two employees who keep working hand in hand helping each other. Online meaning in websites and mostly on Instagram since most people nowadays use most their time surfing the internet for information and some just for their own goods. When they see the advertisement, they wouldn’t mind looking at it and get a clear image of what the advertisement is about and maybe get interested in knowing more about it. In physical resources, the production of pamphlets and brochures should be stopped. The company has to stop the ordering of these papers used in the production process since they won’t be needed anymore. This will save more money because the cost of ordering these papers abroad includes the cost of shipping them and their prices are not cheap. Publication machinery won’t be of use since the production of brochures, flyers and pamphlets will be stopped. This is because due to the technology upraise, people read news and information online and not through papers as how it was few years back. In couple of years there will be no papers publications in advertising world so it’s better that the company starts that now. This will reduce the cost of buying machines and also the repairing and servicing of the machinery after a certain period of time. Technological resources are very hard to manage and control since they change every after a while and it is difficult to cope with it. Barton, R (2013), â€Å"Technology is innovating and expanding at an exponential rate. It’s difficult to grasp how dramatic is the growth of 2 x 2 x 2 x 2†¦Ã¢â‚¬  The only way that it’s possible to manage and control is by allowing the employees to get courses of these new technology in the world and eventually apply them in the operations of a company in advertising. Controlling resources will lead to managing the budget cost since he won’t paying more employees, not buying more machinery that would need services after a period of time and it also costs money. This money that will be saved can be invested in more of the company’s activities than using it in areas that might be of waste. These activities include expansion of the office to a better location or bigger office and getting known all around a targeted area. According to the consumption and saving of money during controlling and managing both resources and budget costs, it is the right way to conduct business since it makes the company get more than what it uses. Mohammed should consider doing this if he doesn’t want to have risks in his business operations since this will make him use less money and gain more than he expects. REFERENCES. Barton, R (2013). Technology’s Explosion: The Exponential Growth Rate. Retrieved on November 25, 2014. Retrieved from http://www.mstech.com/nh-it-blog.php?show=171 Bear, J.H (n.d). Why is Desktop Publishing Important? Retrieved on November 23, 2014. Retrieved from http://desktoppub.about.com/cs/beginners/f/why_dtp.htm Business Burrito (n.d). Employee Motivation. Why Motivating Your Employees is Important. Retrieved on November 24, 2014. Retrieved from http://www.businessburrito.com/why-is-employee-motivation-important.html Training Today (n.d). Employee Training. Retrieved on November 24, 2014. Retrieved from http://trainingtoday.blr.com/employee-training-topics/Employee-Training Wikipedia (n.d). Electronic Publishing. Overview. Retrieved on November 24, 2014. Retrieved from http://en.wikipedia.org/wiki/Electronic_publishing Wikipedia (n.d). Trademark. Public Policy. Retrieved on November 23, 2014. Retrieved from http://en.wikipedia.org/wiki/Trademark